Anion polyacrylamide quality, elected Qingzhou Jinhao!

阴离子聚丙烯酰胺

1, used for sludge dehydration. According to the nature of the sludge, the corresponding brand of this product can be selected, which can effectively dehydrate the gravity sludge before the sludge enters the dewatering machine.

2. It is used as a water treatment flocculant for water plants with surface water as the source of water. Small dosage, good effect, low cost. Especially with inorganic flocculant compound use effect is better.

3, the treatment of steel mill wastewater, the main use is to remove impurities in sewage, sludge dehydration, etc., it is recommended to use anion 12 million molecular weight, 1‰-2‰ per ton of sewage use 5-7 grams.

4, bentonite thickening, mainly plays the role of thickening, the use of highly viscous powder polyacrylamide, molecular weight greater than 20 million, and bentonite mixing ratio of 1‰ to 3‰

5, concrete additives, mainly to thicken the water retention effect, the use of more than 15 million anions, the amount of 0.1‰-1‰

6, mining, iron mining, gold mining, feldspar ore, fluorite ore, etc., the main treatment of tailings pulp, the use of anions 15-18 million. The dissolution ratio is 1‰-2‰, and the amount of waste water added per ton is about 5-8 grams.

7. Coal washing and sand washing. The main role of slime sedimentation or mud-water separation, the use of anions 15-18 million. The dissolution ratio is 1‰-2‰

8, bridge drilling slurry, rotary drilling pile, etc., called chemical mud, the main function, increase the effect of arm protection to reduce the amount of filtration, instead of bentonite, 1‰ increase the use of anion 25 million molecular weight products.

9, paint mortar, thickening effect, the use of anion 15 million molecular weight.

10, drilling wall protection, lubricating drill bits, the use of anionic 15 million to 18 million molecular weight products or polyacrylamide emulsion.

11, oil field flooding, the use of temperature and salt resistant polyacrylamide or high molecular weight polyacrylamide.

12. Shale gas fracturing, used as drag reducer in slippery water fracturing additives, uses more than 18 million molecular weight polyacrylamide emulsion or fine powder products.