Qingzhou Jinhao specializes in the production of cationic polyacrylamide - Welcome to call!

1. This product is used for the treatment of urban domestic sewage and industrial organic wastewater. It is positive in acidic or salty media. It is effective for flocculation, precipitation and clarification of sewage with negative charge of floating particles.

2, for sludge dehydration: according to the nature of the sludge can choose the corresponding brand of this product, can effectively in the sludge into the dehydration machinery before gravity sludge dehydration.

When using the product to dehydrate, it can produce large floc, non-stick filter cloth, no dispersion during filtration press, less dosage, high dehydration efficiency, and the moisture content of mud cake can reach less than 80%.

3. It is used as a water treatment flocculant for water treatment plants with surface water as the source of water. Small dosage, good effect, low cost. Especially with inorganic flocculant compound use effect is better.

4, urban sewage, sludge dewatering, generally use cationic 8-12 million molecular weight, 30-60 ionic degree products. Add 1‰ to 3‰

5, papermaking sewage, the effect of sludge dehydration, generally use cationic 10-12 million molecular weight,20-40 ionic degree products.

6, pharmaceutical sewage, acting on sludge dehydration, generally use cationic 12-15 million molecular weight, 50-60 ionic degree products.

7, acting on air flotation, use 10-20 ionic degree products.

8, food factory wastewater, treatment of organic wastewater, requiring high ionic degree.

9, slaughter wastewater treatment, waste water after fermentation, more than 40 degrees of ion, 12 million molecular weight products for desliming.

10, other areas, such as chemical plant wastewater, some fluorite pulp, acid coal washing wastewater, tannery wastewater, coal chemical industry wastewater, etc., must use cationic polyacrylamide.

11, used for paper retention and filtration, less dosage, good effect, low cost.