Non-ionic polyacrylamide manufacturers direct sales on the choice of Jinhao industry and trade!

1. This product is used for the treatment of urban domestic sewage and industrial organic wastewater. It is positive in acidic or salty media. It is effective for flocculation, precipitation and clarification of sewage with negative charge of floating particles.

2, for sludge dehydration: according to the nature of the sludge can choose the corresponding brand of this product, can effectively in the sludge into the dehydration machinery before gravity sludge dehydration. When using the product to dehydrate, it can produce large floc, non-stick filter cloth, no dispersion during filtration press, less dosage, high dehydration efficiency, and the moisture content of mud cake can reach less than 80%.

3. It is used as a water treatment flocculant for water treatment plants with surface water as the source of water. Small dosage, good effect, low cost. Especially with inorganic flocculant compound use effect is better.

4, coal washing: part of the coal washing water needs to use non-ionic polyacrylamide 10-12 million products for sedimentation, in order to achieve the desired effect.

5, washing sand and fluorite feldspar ore: due to different geology in various regions, some soil particles are finer and more viscous, and non-ionic products of 10-12 million molecular weight are needed to fully flocculate and achieve the use effect.

6, titanium dioxide plant sewage treatment: titanium dioxide plant effluent water temperature control at 50 ° C, PH generally need to add alkali to 7-9, and then use 12 million molecular weight non-ionic polyacrylamide treatment, to achieve the effect.

7, electroplating sewage: hydroxide treatment, the use of more than 8 million molecular weight non-ionic products.

8, drilling plugging, the use of non-ionic 12 million molecular weight products and crosslinking agents shared.