MX-W8503 Water treatment agent

1. Troublesome

The small solid flocs in sewage settle slowly, the water quality clarifies slowly, the sludge dewaters slowly, and the sludge dryness is low.

2. Product introduction:

MX-W8503 is a water-soluble polymer. Since its molecular chain contains a certain number of polar groups, it can form bridges between particles by adsorbing solid particles suspended in water or agglomerating particles through charge neutralization. Large flocs can accelerate the settling of particles in suspension, and have very obvious effects on accelerating solution clarification and promoting filtration.

3. Main technical indicators:

Appearance: white powder Solid content: ≥88%

Molecular weight: ≥8 million Recommended solution concentration viscosity: 0.1%-0.3%

Ionic type: anion Dissolution time: ≤1 hour

4. Feature:

4.1 It has good water solubility and can be completely dissolved in cold water.

4.2 Adding a small amount of water treatment agent product can achieve great flocculation effect. Generally, you only need to add 1000-3000ppm to fully exert its effect.

4.3 The aqueous solution has properties such as flocculant, thickening, shearing, drag reduction, and dispersion;

There are active genes in the molecule, which can change the state of the interface after being adsorbed on the interface; it has affinity and adsorption with many substances to form hydrogen bonds. In water treatment, it can build bridges between adsorbed particles, allowing several or even dozens of particles to be connected. At the same time, it promotes the aggregation of colloidal particles into large flocs, accelerates the settlement of particles in suspension, accelerates solution clarification, and promotes filtration.

4. Use MX-W8503 and inorganic flocculants (polymer ferric sulfate, polyaluminum chloride, iron salt, etc.) at the same time to show better results.

5. Scope of application:

Mainly used for flocculation, sedimentation, sedimentation and clarification treatment of various industrial wastewaters, such as chemical plant wastewater, papermaking wastewater, steel plant wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater and other sewage treatment, sludge dehydration, slaughtering wastewater, breeding wastewater, etc. It can also be used for drinking water clarification and purification treatment;

6. Usage:

The dissolution tank is stirred with clean water to dissolve a concentration of 0.1-0.2%. The dissolution time is about 60 minutes. It can be used with PAC in sewage sedimentation or alone in sludge dehydration. Generally, cationic products are used for sludge dehydration.