JHD-3305 WATER-BASED BARRIER COATING

1.Product Introduction

JHD 3305 is a water-based high-performance barrier coating that can be used for paper coating. The coated paper can come into contact with food and has waterproof and oil resistant properties. The coating surface can be printed. The coated paper can be used for waterproof and oil resistant paper without heat sealing requirements, such as hamburger/cake paper.

2.Main technical indicators

Appearance: Milky white semi transparent liquid Solid content: 40% ± 2

Viscosity: ≤ 500 mPa. s Density: 1-1.02 (25 ° C)

PH value: 6-9

3.Performance Characteristics

Water resistance: COBB value 6-8 after 30 minutes (affected by coating quality)

Oil resistance level: KIT test>12

Coating after drying

The coating does not have anti sticking, and the anti sticking performance is excellent under film to film or film to paper conditions.  

The coating has no odor.  

Meets U.S. FDA 21 CFR 176.170 food contact standards

Compliant with GB 9685/4806

Compliant with REACH standards

Fluorine-free

4.Usage method

Suitable for multiple coating methods, hot air baking and drying

Coating amount: 4-6 grams per square meter (total dry film amount, choose coating amount according to protection requirements, to ensure uniform and dense coating, it is recommended to apply twice)

The temperature for rewinding after coating should be below 40 ° C to prevent anti sticking.

5.Precautions

Before construction, the paint needs to be thoroughly mixed evenly.

If the viscosity is too high, you can add about 5% water for dilution.

If in contact with the skin, rinse with clean water.

After use, please tighten the cap, seal and store it, and avoid direct sunlight.

6.Packaging storage

Storage: 5 ° C-25 ° C, away from light

Packaging: 25L/drum, 200L/drum, ton drum

Shelf life: Six months